My trigger box does not freely travel down the flight rail to the bowstring. How do I correct this?
If your trigger box does not freely travel down the flight rail when beginning the cocking process, please view the video Assisting the ACUslide Trigger Box Down the Flight Rail or follow the step-by-step instructions below.
Instructions:
There are two ways to correct this condition:
Method 1: Rotate the crank handle counterclockwise to lower the trigger box down the flight rail.
or
Method 2: Insert the crank handle into the square recess hole in the unit and press the gear stop button located directly underneath the ACUslide unit in the stock. While holding the gear stop button, turn the crank handle counterclockwise 1-2 full turns. Remove the crank handle from the ACUslide unit and release the gear stop button. Your trigger box should freely travel down the flight rail to the bowstring.
